Mikrotik RouterOS➧
Overview
For Mikrotik routers running RouterOS WildcoreDMS works through the RouterOS API and shows a dedicated page with interfaces, address lists, ARP, DHCP, queues and BGP sessions. Mikrotik CRS/SwOS switches work as regular switches.
Component
Mikrotik RouterOS (router_os).
Connection➧
- RouterOS API access is required: the
apiservice is enabled on the router and allowed from the WildcoreDMS server address. - Login and password are taken from the device access.
- The default API port is
8728. To change it: for the whole system —SWC_MIKROTIK_API_PORTin System configuration, for a model or a device — themikrotik_api_portkey in additional parameters.
Tabs➧
| Tab | What it shows |
|---|---|
| Interfaces | Name, type, status (up/down/disabled), last link-up time, link-down count, traffic and counters |
| Address list | Firewall address lists: list name, address, dynamic/disabled flag, creation time |
| ARPs | IP, MAC, interface (VLAN), status, comment |
| Leases | DHCP leases: IP, MAC, hostname, DHCP server, status, lease time and expiration, last seen |
| DHCP servers | Servers: name, interface, address pool, lease time |
| Simple queues | Simple queues: name, target (IP), limit-at, max-limit, type, dynamic/disabled |
| BGP sessions | Local AS, Router ID, number of established sessions; for each peer — remote address and AS, IPv4/IPv6, local address, state, time in current state, last error. RouterOS v6 and v7 are supported — see BGP sessions |
Data is refreshed with the tab's refresh button. Interface traffic history is collected by the poller.
Permissions
Viewing requires the "Get router OS info" permission.